Avoid using cold water to cool an overheated engine

0

[ad_1]

A car engine can overheat due to a faulty cooling system, leak, dirty radiator, faulty water pump or fan.

The temperature gauge indicates when the car is overheating. So what happens when you realize the engine is overheating?

Joël Katongole, a mechanic says resist the temptation to use cold water to cool the engine because the cars were not built to use water, but coolants for the purpose of cooling.

He explains that water exposes car parts to corrosion and therefore dirt buildup while coolants prevent parts from corroding, dirt and some types repair leaks.

The water, he states, should get to the radiator before it overheats and if it does, the motorist should first let the engine cool before restarting it.

“You have to let the engine cool down, but also if you manage to get the radiator cover off, slowly pour water into the radiator while the engine is running,” he explains.

Charles Ssemukuutu says “cold water doesn’t work” but recommends hot water.

He explains that when water is warm, it is less dense than cold water.

“Hot water is supposed to stabilize and be cold. He advises the use of hot water because it is not at a low temperature,” he explains.

Ssemukuutu also adds that water is a corrosion agent. Even though lately there are more aluminum engines, there are still points where we find the need for steel which tends to corrode.

“Aluminum doesn’t rust, but the parts that come with the aluminum – those little steel and cast iron plugs tend to rust, causing the oil to mix with the water,” he explains. he.

Cast iron also expands rapidly when heated, and since the pistons are aluminum, they expand if the engine is run at high temperatures, developing cracks.

The heat also burns gaskets and cracks cylinder heads.

[ad_2]
Source link

Share.

Comments are closed.